ChristianB229
New member
- Joined
- Apr 30, 2024
- Messages
- 1
I have a T190. It had been running fine. Shut it off one day and it would not start. Went back a few days later and it started right up. Parked it in the shed, and since then will not start. Checked all the fuses and relays. When you turn on the key switch it sends 5 vdc to fuel shut off solenoid, but does not send the 12 vdc to the solenoid or to the start relay when you turn the key to start. Have verified that key switch is good. The key switch feeds into the control console and it has multiple purple wires in the wiring harness. Does anyone have a wiring diagram for this machine or know which safety the 12vdc start ouput goes to first?
