bobcat 530 won't start error M1403 Fuel pull solenoid

[JimT]

We were operating the skidsteer with no problems, everything was normal when it was stopped. Now when trying to start the engine cranks about 1/2 a rotation and throws the M1403 code Fuel pull Solenoid, error off. What needs to be done to get her running again. Thanks, Jim

 

[Bobcatdan]

Probably a new fuel shut off solenoid. Check the fuse and the relay first. Always good idea to replace the relay when replacing the solenoid.

 

[JimT]

Probably a new fuel shut off solenoid. Check the fuse and the relay first. Always good idea to replace the relay when replacing the solenoid.

Thanks for the info. We had a mechanic out today that found the relay bad.

 

[zbshan]

Probably a new fuel shut off solenoid. Check the fuse and the relay first. Always good idea to replace the relay when replacing the solenoid.

Sometime, if has no enough battery power, it will not trigger the relay. Replave the battery or fully charge it, then start.