Forums
New posts
Search forums
What's new
New posts
New media
New media comments
New profile posts
Latest activity
Media
New media
New comments
Search media
Members
Current visitors
New profile posts
Search profile posts
Log in
Register
What's new
Search
Search
Search titles and first posts only
Search titles only
By:
New posts
Search forums
Menu
Log in
Register
Install the app
Install
Forums
Bobcat Skidsteer Forums
General Bobcat Skidsteer Forum
bobcat t190 shutting down from low oil pressure
JavaScript is disabled. For a better experience, please enable JavaScript in your browser before proceeding.
You are using an out of date browser. It may not display this or other websites correctly.
You should upgrade or use an
alternative browser
.
Reply to thread
Help Support SkidSteer Forum:
Message
<blockquote data-quote="joesmith123" data-source="post: 134954" data-attributes="member: 24895"><p>[ATTACH=full]6640[/ATTACH][ATTACH=full]6641[/ATTACH]</p><p></p><p>Machine is locked up, fully stuck in a pit</p><p></p><p>Usually, when it is cold, the machine can lift/tilt, but at this moment, lift tilt fully locked</p><p></p><p>I cannot get it out of the pit because the bucket is locked</p><p></p><p>Pictures: Sensor location under cab, tried fixing old sensor, didnt work, tried putting in new sensor that does not fit into the hole but will take the wires, still lift tilt flashing</p><p></p><p>Anyone know how can bypass this situation so I can get the machine out of the pit? </p><p></p><p>It nees to be picked up in a couple days, and needs to be moved</p><p></p><p>I am working on the machine and watching yalls replies because I need solution asap</p><p></p><p>thanks</p><p></p><p>here is some directions I found about disabling the BICS system:</p><p></p><p>If it's in your way, as you say it is, to TEMPORARILY bypass the BICS, raise the cab and look at the valve block. There should be a solenoid valve in it and a wire going to it, with a plastic warning tag on it. Unplug the wire, and hook the portion going to the solenoid to a 12V hot and ground.</p><p></p><p>Basically give the solenoid power and see what happens</p><p></p><p>What is the easiest way to conduct this test? I will now go and put power to those two ends on the old solenoid, I will run temporary wires to the battery and see what she does</p></blockquote><p></p>
[QUOTE="joesmith123, post: 134954, member: 24895"] [ATTACH type="full" alt="sensorproblem.jpeg"]6640[/ATTACH][ATTACH type="full" alt="sensor problem 2.jpeg"]6641[/ATTACH] Machine is locked up, fully stuck in a pit Usually, when it is cold, the machine can lift/tilt, but at this moment, lift tilt fully locked I cannot get it out of the pit because the bucket is locked Pictures: Sensor location under cab, tried fixing old sensor, didnt work, tried putting in new sensor that does not fit into the hole but will take the wires, still lift tilt flashing Anyone know how can bypass this situation so I can get the machine out of the pit? It nees to be picked up in a couple days, and needs to be moved I am working on the machine and watching yalls replies because I need solution asap thanks here is some directions I found about disabling the BICS system: If it's in your way, as you say it is, to TEMPORARILY bypass the BICS, raise the cab and look at the valve block. There should be a solenoid valve in it and a wire going to it, with a plastic warning tag on it. Unplug the wire, and hook the portion going to the solenoid to a 12V hot and ground. Basically give the solenoid power and see what happens What is the easiest way to conduct this test? I will now go and put power to those two ends on the old solenoid, I will run temporary wires to the battery and see what she does [/QUOTE]
Verification
Post reply
Forums
Bobcat Skidsteer Forums
General Bobcat Skidsteer Forum
bobcat t190 shutting down from low oil pressure
Top